Filter
Top Products
2 Introduction
INTRODUCTION
We would like to thank you for purchasing a Seal 44/62 Ultra Plus, designed to give you
many years of reliable service. By following the guidelines outlined in this manual for
proper care and use, you can depend on many years of trouble-free profitability from your
investment.
Your 44/62 Ultra Plus laminator meets the CE Machinery Safety Directive (89/392/EEC,
including 91/368/EEC, 93/44/EEC and 93/68/EEC) and is ETL listed (UL 1950/EN60950).
Statement of intended use.
The 44/62 Ultra Plus laminator has been designed to be used with Seal materials. When
used with this products, you are able to mount, mount and laminate, and encapsulate
prints in one step. Your machine has not been tested with any other materials and is not
recommend for use with products other than Seal supplies.
WARNING:
THIS MACHINE IS DESIGNED FOR MOUNTING AND LAMINATING. ANY
USE OTHER THAN THE INTENDED MAY CAUSE DAMAGE TO THE
MACHINE OR PHYSICAL HARM TO THE USER.
Liability Statement
The details given in this manual are based on the most recent information available to us.
They may be subject to change in the future. We retain the right to make changes to the
construction or the design of our products without accepting any responsibility for
modifying earlier versions previously delivered.
Standardized Symbols
Passages marked this way offer an idea / tip or other information on the
efficient use of this unit.
WARNING:
PLEASE PAY ATTENTION TO ALL PASSAGES MARKED THIS WAY.
THIS INFORMATION IS VITAL TO PREVENTING USER INJURY AND /
OR DAMAGE TO THE UNIT. FAILURE TO FOLLOW THIS
INFORMATION COULD VOID THE USER’S WARRANTIES AND
TRANSFER ALL SAFETY OBLIGATIONS TO THE USER.