Filter
Top Products
(8) Ending the bar code data sequence: ESC SO
Format: ASCII ESC SO
Hex 1B 0E
Decimal 27 14
Function: Indicates the ending the bar code data sequence.
This command is valid only when #27 BARCODE/LABEL MODE is set
to MODE 2 in the EXTENDED SETUP MODE.
(9) Bar code data sequence: DC4 DC4 B
Format: ASCII DC4 DC4 B n d1 d2 ... dk
Hex 14 14 42 n
Decimal 20 20 66 n
Function: Specifies the number (“n”) of data to be regarded as bar code data.
00 ≤
n
≤ 68
00 ≤
dk
≤ 255
00 ≤
k
≤ 68
If the Element is selected; 0
≤
n, dk, k
≤ 255
This comand is valid when #27 BARCODE/LABEL MODE is set to MODE1 or
MODE2 in the EXTENDED SETUP MODE.
(10) Printing density: DC4 DC4 D
Format: ASCII DC4 DC4 D n
Hex 14 14 44 n
Decimal 20 20 68 n
Function: Specifies the density of printing bar code symbols (in the horizontal
direction).
Specifies the unit of element width.
n = 0: Bar code symbols are printed at 120 dpi. (Default value)
1: Bar code symbols are printed at 180 dpi.
If a bar code is rotated by 90 or 270 degrees using the DC4 DC4 R (bar code
rotational angle) command, a bar code is printed at 120 dpi horizontally and 180
dpi vertically.
(11) Guard bar expansion: DC4 DC4 G
Format: ASCII DC4 DC4 G n
Hex 14 14 47 n
Decimal 20 20 71 n
Function: Specifies whether or not to expand EAN or UPC guard bars.
n = 0: Guard bars are not expanded.
1: Guard bars are expanded. (Default value)
9. Bar code and enlarged character
73