Filter
Top Products
22
Initial Color Balance Setting
Color balance settings that have been adjusted using the special
function of “Color Balance” explained on page 3-22 of the Operation
Manual can be called up and set as initial color balance settings* by
storing them ahead of time in a job program (page 2-18 of the
Operation Manual). Use this feature when you want to repeatedly use
settings for a favorite color or for correction when a change occurs in
the color balance.
* Preset values displayed when you select the special function of
“Color Balance”. The factory default settings are the “0” position for
all eight levels of each color.
When the “INITIAL COLOR BALANCE SETTING” key is pressed, the
following display will appear.
1. Press the job program number key in which the color
balance settings have been stored.
●
If a job program number key is pressed that does not have color
balance settings, a warning message will appear.
●
To return color balance settings that have been stored as initial
settings to the factory default settings (the “0” position for all eight
levels of each color), press the “RETURN TO THE FACTORY
DEFAULT SETTINGS” key.
2. Press the “OK” key.
●
The color balance settings stored in the job program number key
that was pressed are set as the initial settings.
Size Setting for [EXTRA]
This program allows the paper size to be set for each paper tray. The
setting through this program will only be effective when the paper size
indicator of the paper tray is set to [EXTRA].
When the “SIZE SETTING FOR [EXTRA]” key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
INITIAL COLOR BALANCE SETTING
PRESS PROGRAM NUMBER IN WHICH COLOR BALANCE
PROGRAM IS REGISTERED.
OK
RETURN TO THE FACTORY DEFAULT
SETTING.
123
456
789