Filter
Top Products
5
KEY OPERATOR PROGRAMS
Category Program Name Function Page No.
Transfer Belt Position Switches the transfer belt to either the B/W side or 21
the color side.
Initial Color Balance Sets the initial color balance settings. 22
Setting
Size Setting for Sets a paper size in each tray with [EXTRA] setting. 22
[EXTRA]
Require Key Prevents the copier from being started by people 23
Operator Code other than key operator.
Stream Feeding Enables the stream feeding mode for copying 24
Mode from the optional document feeder.
Override Sorter Bin Cancels limit control of operation in case of bin 24
Capacity Limit capacity overflow of an optional staple sorter.
Timer Settings Sleep Mode Sets a time interval after which the copier enters the 25
Setting sleep mode after copying is completed.
Auto Clear Setting Sets a time interval after which the copier returns 25
to the initial settings.
Preheat Mode Sets the time that elapses before the copier enters 26
Setting the preheat mode after copying is completed.
Message Time Sets the length of time that messages are displayed. 26
Setting
Enable/Disable Disabling of Beep Enables or disables sounding of beep when keys 27
Settings When Keys Touched are touched.
Disabling of Auto Prevents automatic paper selection. 27
Paper Selection
Disabling of Auto Prevents automatic switching between the paper 27
Tray Switching trays.
Disabling of Prohibits the use of the bypass tray during 28
Bypass-Tray duplex copying. (Duplex copying can be performed
in Duplex Copy when an optional duplex module is installed.)
Disabling Prevents stored programs from being replaced or 28
Deletion of Job deleted.
Programs
Disabling of Prevents the use of the optional document feeder 28
Document Feeder when it malfunctions.
Disabling of Duplex Temporarily prevents the optional duplex system from 28
Copying operating when it malfunctions. Allows the use of the
copier but not the duplex system.