Filter
Top Products
27
KEY OPERATOR PROGRAMS
ENABLE/DISABLE SETTINGS
The programs of this category are used to enable or disable some
functions. These programs can be set or canceled by pressing the
check box of each program.
Disabling of Beep When Keys Touched
This program is used to enable or disable the beep function. If this
function is enabled, a beep sound will be produced when you press a
key on the operation panel including the touch panel.
To disable the beep function, press the check box of
“DISABLING OF BEEP WHEN KEYS TOUCHED” to display a
check mark in the check box.
To enable the beep function, press the check box of this
program again to clear the check mark in the check box.
Disabling of Auto Paper Selection
This program is used to prevent automatic paper selection. When
disabled, the copier will not automatically select a paper tray containing
paper that matches the size of the original placed on the document
glass or in the optional document feeder.
To disable auto paper selection, press the check box of
“DISABLING OF AUTO PAPER SELECTION” to display a
check mark in the check box.
To restore this function, press the check box of this program
again to clear the check mark in the check box.
Disabling of Auto Tray Switching
This program prevents automatic switching between the paper trays.
To disable auto tray switching, press the check box of
“DISABLING OF AUTO TRAY SWITCHING” to display a
check mark in the check box.
To restore this function, press the check box of this program
again to clear the check mark in the check box.