Filter
Top Products
21
If you have more originals to scan, press [Yes] within 60 sec-
onds, place the next original on the exposure glass, and then
press [OK]. Repeat this step until all originals are scanned.
If you do not press [Yes] within 60 seconds, the machine will start to dial
the destination.
When all originals have been scanned, press [No] to start
sending the fax.
To cancel sending a fax, press the [Facsimile] key, and then press the [Clear/Stop] key. •
A fax number can contain 0 to 9, pause, “ • “, “ “, and space.
If necessary, insert a pause in a fax number. The machine pauses briefl y before it dials the •
digits following the pause.
To use tone services on a pulse-dialing line, insert “ • ” in a fax number. “ ” switches the dialing
mode from pulse to tone temporarily.
If paper is jammed in the ADF, the jammed page has not been scanned properly. When the •
machine is in Immediate Transmission mode, resend the fax starting from the jammed page.
When in Memory Transmission mode, scan the entire originals again.
You can also specify a fax destination using the Quick Dial, Speed Dial, Broadcast, or Redial •
functions. For details, see “Using the Fax Function”, User Guide.
By default, the machine is set to print a transmission report automatically after a fax transmis- •
sion. To change this setting, see “Confi guring the Machine Using the Control Panel”, User
Guide.
For information about originals, see “Getting Started”, • User Guide.
For information about removing jammed paper, see “Removing Paper Jams” on page 29. •