Sharp DX-C200 Copier User Manual


 
39
When removing print cartridges, be careful not to touch
the Laser Scanning Unit on the underside of the upper
cover (the position shown by the arrow in the illustra-
tion).
If cyan, magenta, or yellow toner runs out, you can print in black and white using just the black
toner. Change the color mode setting to Black and White using the machine’s driver.
If black toner runs out, you cannot print in black and white or color until the black print car-
tridge is replaced.
Pull up the lever on the top cover,
and then carefully raise the top
cover.
Make sure that the ADF is closed.
CES138
Carefully lift out the print cartridge
vertically, holding its center.
• Do not shake the removed print cartridge.
Doing so can cause remaining toner to
leak.
• Place the old print cartridge on paper
or similar material to avoid dirtying your
workspace.
• The toner color is indicated by the label
on each print cartridge.
CES408
CES137