Filter
Top Products
9
Using the Copier Function
❖ Making Enlarged or Reduced Copies
You can specify the reduction or enlargement ratio for the current job. There are two
ways to set the scaling ratio: using a preset ratio or manually specifying a custom
ratio.
Press the [Reduce/Enlarge] key.1.
Press [Reduce] or [Enlarge], press the [ 2. ][ ][ ][ ] keys to select the desired ratio,
and then press the [OK] key.
If [Zoom] has been selected, specify the desired ratio using the number keys, and then 3.
press the [OK] key.
❖ Copying Multiple Pages onto One Sheet
This function is only available when the original is set in the ADF, not when it is set on the •
exposure glass.
To use this function, the paper size used for printing copies must be set to A4, Letter, or Legal. •
You can set 2-in-1/4-in-1 copy mode for the current job.
Press the [Reduce/Enlarge] key.1.
Press [Reduce], press the [ 2. ][ ][ ][ ] keys to select [Comb. 2 on 1] or [Comb. 4
on 1].
Press the [ 3. ][ ] keys to select the desired printout format, and then press the [OK]
key.
The following types of printout format can be selected depending on your preference.
Printout formats for 2-in-1 copying
[Portrait] [Landscape]
CES033
CES034
Printout formats for 4-in-1 copying
[Portrait: L to R] (Left to Right) [Landscape: L to R] (Left to Right)
CES035
CES037
[Portrait: T to B] (Top to Bottom) [Landscape: T to B] (Top to Bottom)
CES036
CES038
Advanced Photocopy Settings