Filter
Top Products
24
Troubleshooting
Message
(alphabetical order)
Causes Solutions
I/O Timeout
The timeout period
set in [I/O Timeout]
expires when printing
is frequently inter-
rupted by data from
other ports, or when
printing data is large
and takes time for
processing.
If [I/O Timeout] is set to 15 sec-
onds, increase the time period.
For details, see "Machine Set-
tings", User Guide.
Internal Misfeed
Paper has been
jammed in the
machine.
Remove the jammed paper.
See "Removing Paper Jams" on
page 29.
Memory Almost Full
Memory has almost
reached capacity dur-
ing sort copy.
If several originals are still to be
scanned, it is recommended to
start printing now, and copy the
remaining originals separately.
If originals are being scanned
from the ADF, remove any re-
maining pages from the ADF.
Misfeed: Dup. Unit
Remove Paper
Paper has been
jammed in the duplex
unit.
Remove the jammed paper.
See "Removing Paper Jams" on
page 29.
Misfeed: Paper Tray
Paper has been
jammed in the paper
tray.
Remove the jammed paper.
See “Removing Paper Jams” on
page 29.
Misfeed: Stnd. Tray
Paper has been
jammed in the paper
exit area.
Remove the jammed paper.
See "Removing Paper Jams" on
page 29.
Misfeed: Tray 1
Paper has been
jammed in the ADF
input tray.
Remove the jammed paper.
See "Removing Paper Jams" on
page 29.
Misfeed: Tray 2
Paper has been
jammed in the ADF
output tray.
Remove the jammed paper.
See "Removing Paper Jams" on
page 29.
Error and Status Messages on the Screen