Sharp DX-C200 Copier User Manual


 
42
Where to Inquire
Contact your sales or service representative for further information about topics
covered in this manual or to inquire about topics not covered in this manual.
Saving Energy
This machine is equipped with the following Energy Saver modes: Energy Saver
mode 1 and Energy Saver mode 2. In Energy Saver mode, the machine’s power
consumption is reduced from its normal state.
By default, this machine is set to enter Energy Saver mode 1 if it has been idle for
30 seconds. If another 10.1 minutes pass, the machine will then enter Energy Sav-
er mode 2. The machine takes about 10 seconds to recover from Energy Saver
mode 1, and about 30 seconds to recover from Energy Saver mode 2.
According to your convenience, you can change how long the machine waits be-
fore entering Energy Saver mode 2 by configuring [Energy Saver Mode] under
[Admin. Tools].
If the machine is in Energy Saver mode 2 for 24 hours continuously, the machine automatically
returns to normal state and performs self-maintenance.
For details about Energy Saver modes, see “Administrator Settings”, User Guide.
Appendix