Filter
Top Products
• For details about printing configuration page using the control panel, see p.53 "Printing the
Configuration Page".
• For details about printing configuration page using Web Image Monitor, see p.101 "Printing Lists/
Reports".
In other cases
Add the IPv4 address and host name of the network printer to the hosts file on the computer used for
printing.
1. Open the hosts file using memo pad files, for instance.
The hosts file is in the following location:
\WINDOWS\SYSTEM32\DRIVERS\ETC\HOSTS
2. Add an IPv4 address and host name to the hosts file using the following format:
192.168.15.16 host# NP
"192.168.15.16" is the IPv4 address, "host” is this printer's host name, and "#NP” is replaced by
comments. Insert a space or tab between “192.168.15.16” and "host”, between "host” and
"#NP” respectively, using one line for this format.
3. Save the file.
Printing Commands
The following explains printing operations using the "lpr" and "ftp" commands.
Enter commands using the command prompt window. The location of the command prompt varies
depending on operating systems:
• Windows XP/Vista/7, Windows Server 2003/2003 R2/2008/2008 R2
[Start] - [All Programs] - [Accessories] - [Command Prompt]
• Match the data format of the file to be printed with the emulation mode of this printer.
• If the message "print requests full" appears, no print jobs can be accepted. Try again when sessions
end. For each command, the amount of possible sessions is indicated as follows:
• lpr: 10
• Enter the file name in a format including the path from the directory executing commands.
8. Special Operations under Windows
116