Filter
Top Products
Maintenance Menu
You can adjust the color registration or specify the toner near-end notification timing.
Adjusting the Color Registration
After moving the printer, printing on thick paper, or printing repeatedly for some time, color degradation
may occur. By performing color registration adjustment, you can restore optimum print quality.
If documents show color degradation after the printer is moved, perform automatic color adjustment.
1. Press the [Menu] key.
CER408
The menu screen appears.
2. Press the [ ][ ] keys to select [Maintenance], and then press the [OK] key.
3. Press the [ ][ ] keys to select [Color Dens/Reg], and then press the [OK] key.
4. On the confirmation screen, press the [OK] key.
Automatic color adjustment begins.
A confirmation message appears when the adjustment is complete.
5. Press the [Menu] key to return to the initial screen.
Maintenance Menu Parameters
This section explains about parameters that can be set on the Maintenance menu.
Color Dens/Reg
Adjusts color density and registration automatically.
TonerAlmstEmpty
Specifies the low toner level notification timing.
Default: [Normal]
Maintenance Menu
55