Sharp MX-2300N Copier User Manual


 
158
STORING A JOB PROGRAM
The procedure for storing copy settings in a job program is explained below.
1
Press the [PROGRAM] key ( ).
2
Touch the [Store/Delete] tab.
3
Touch a numeric key that is not
highlighted.
Numeric keys in which job programs are already stored are
highlighted.
If a highlighted numeric key is touched, the following screen appears.
The [Store] key can be touched to delete the stored settings and store new settings.
When "Disabling Deletion of Job Programs" is enabled in the system settings (administrator), this function cannot be used.
4
Select the copy settings that you wish to
store in the job program and touch the
[OK] key.
To assign a name to the program, touch the [Program Name]
key. A text entry screen will appear.
Up to 10 characters can be entered for the name.
To enter text, see "6. ENTERING TEXT" in the User's Guide.
When you have finished entering the name, touch the [OK] key.
The number of copies cannot be stored.
LOGOUT
Job Programs
Press program number.
5 6 7
3
8
41 2
1/6
Exit
Store/Delete
Recall
Job Programs
Press program number.
1 2
5 6 7
3
8
4
1/6
Recall
Exit
Store/Delete
A job program has been already stored
in this location.
Cancel Delete Store
To store, make selections and press
[OK], to delete, press [Cancel].
2-Sided Copy
Original
Output
Program Name
Full Colour
Colour Mode
2.
3.
4.
1.
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
A4
Cancel OK
A4
A4R
B4
A3
A4
A4
Plain