Sharp MX-2700G Scanner User Manual


 
6
PREPARATIONS FOR USE AS A NETWORK
SCANNER
MAKE SURE THE MAIN POWER SWITCH IS IN THE
"ON" POSITION
The main power is "on" when the main power indicator on the right side of the operation panel is lit.
If the main power indicator is not lit, the main power is off. Switch the main power switch to the "on" position and press
the [POWER] key ( ) on the operation panel.
If the Internet fax function will be used, and in particular if reception or timer transmission will take place at night, always
keep the main power switch in the "on" position.
CHECKING THE DATE AND TIME
To check if the date and time are set correctly in the machine, follow the steps below.
When the [POWER SAVE] key indicator light is blinking, the machine is in auto power shut-off mode. If the [POWER SAVE]
key is pressed when the indicator is on, the indicator will turn off and the machine will return to the ready state after a brief
interval.
LOGOUT
Main power indicator
[POWER SAVE] key / indicator
Main power switch
"On"
position
1
Press the [SYSTEM SETTINGS] key.
2
Touch the [Default Settings] key.
SYSTEM
SETTINGS
System Settings
ExitAdmin Password
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Default Settings
Total Count
Paper Tray
Settings
Printer Condition
Settings
Address Control
Document Filing
Control