Sharp MX-6500N Printer User Manual


  Open as PDF
of 40
 
33
ADMINISTRATOR
Forwarding all sent data to the administrator (document administration function)
Setting mode password
Thisfunctionisusedtoforwardalldatasentbythemachinetoaspecieddestination
(Scan to E-mail address, Scan to FTP destination, or Scan to Network Folder
destination). This function can be used by the administrator of the machine to archive
allsentdata.Tocongurethedocumentadministrationsettings,click[Application
Settings] and then [Document Administration Function] in "Settings mode".
(Administrator rights are required.)
The forwarding data, exposure, and resolution settings of sent data remain
in effect.
Account Password
User user users
Administrator admin admin
System administrator sysadmin sysadmin
Do not forget the new administrator password.
Anadministratorpasswordisrequiredtocongurethemachinesettingsusing
administrator rights.
Thesettingscanbeconguredfromeithertheoperationpanelorbyusingacomputer
web browser.
After setting up the machine, refer to "Settings mode" in the User’s Manual to set a
new password.
The same administrator password is used for the operation panel and the
Web page. If the administrator changes a password on the operation panel,
the password will be valid when logging in to the Web page.
Password for logging in from a computer
As factory default, "Administrator" is the only account allowed to log in from a Web
browser. By setting user authentication, "System Administrator" will also be allowed to
log in from the Web browser. You can also specify a device account as a login user.
The factory default passwords for respective accounts are shown in the following.
Logging in as an "Administrator" or "System Administrator" allows you to manage all
the settings available via Web browser.
 previous next