Filter
Top Products
Network Scanner Tool Installation
To install the Network Scanner Tool:
1. Make sure you have a supported scanner connected to the network.
2. If any Windows applications are open, close them to ensure that the software installs
properly.
3. Insert the installation CD into your CD-ROM drive. In a few moments, the Sharpdesk
Welcome screen appears. If the Sharpdesk Welcome screen does not appear (for
example, because you have disabled the Windows AutoRun feature), run the Setup.exe
program located in the \Sharpdesk directory on the CD.
Sharpdesk Welcome Screen
4. Click Next, and then follow the on-screen instructions to complete the installation.
At the end of installation, the program may ask you if you want to reboot your computer.
If so, you must reboot to complete the installation of the Network Scanner Tool. When the
Sharp Network Scanner Tool Setup Wizard appears, either at the end of the Sharpdesk
installation or at the end of the reboot process, it will guide you through setting up your
computer as a destination for scans made on supported network scanners (refer to the next
section for detailed information). You will need to turn on the scanner for this to function
properly.
Network Scanner Tool Setup Wizard
After rebooting your computer, the Welcome to Network Scanner Tool Setup Wizard screen
displays. The wizard will only run once, so be sure to follow the on-screen prompts closely.
8 Network Scanner Tool User’s Guide