Filter
Top Products
LOADING PAPER
19
2
Special papers
Follow these guidelines when using special papers.
● Use SHARP recommended transparency film and label sheets. Using other
than SHARP recommended paper may result in misfeeds or smudges on
the output. If other than SHARP recommended media must be used, feed
each sheet one at a time using the bypass tray (do not attempt continuous
copying or printing).
● There are many varieties of special paper available on the market, and
some cannot be used with this machine. Before using special paper,
contact a SHARP service center.
● Before using other than SHARP recommended paper, make a test copy to
see if the paper is suitable.
LOADING THE PAPER TRAY
1
Raise the handle of the paper tray
and pull the paper tray out until it
stops.
2
Remove the pressure plate lock. Rotate the pressure plate lock
in the direction of the arrow to remove it while pressing down
on the pressure plate of the paper tray.
3
Store the pressure plate lock which has been removed in step
2. To store the pressure plate lock, rotate the lock to secure it
as shown below.
Make sure that the paper is not torn, is free of dust, and has no wrinkles
or curled edges.
Note
Pressure plate lock