Filter
Top Products
71
8
Chapter 8
8
Problems related to general use of the machine, the copy function, and software
setup are explained here. Be sure to check the problem carefully before calling for
service, as many problems can be solved by the user.
If you are unable to solve the problem, turn off the main switch, unplug the power
cord from the outlet, and contact your dealer.
DISPLAY MESSAGES
When the following indicators light up or blink on the operation panel or the following
alphanumeric codes appear in the display, solve the problem immediately referring
to both the table below and the indicated page.
For problems related to the printer and scanner functions, see the
online manual.
Be sure to use only genuine SHARP parts and supplies.
Indication
Cause and remedy Page
Lamp indicator Display
Tray
location
indicator
Blinks
BYPASS : ADD
PAPER
The indicated paper tray is not
attached, is attached incorrectly, or has
run out of paper.
19
TRAY * : ADD
PAPER
CLOSE PAPER
TRAY *
Error
indicator
Blinks
CLEAR PAPER
JAM
A paper misfeed has occurred.
Remove the misfeed as explained in
"MISFEED REMOVAL".
80
SPF/RSPF JAM.
FRONT OR SIDE
COVER OPEN.
CLOSE COVERS.
The cover is open. Close the cover. -
CLOSE THE SPF/
RSPF COVER.
The RSPF cover is open. Close the RSPF
cover.
83
REPLACE THE TD
CARTRIDGE.
The toner cartridge is empty. Replace
the toner cartridge with a new cartridge.
(When the indicator blinks, the machine
does not operate.)
85
SYSTEM ERROR
[XX - XX] REFER
TO USER GUIDE
When [L1-00] appears, the scan head
locking switch is locked. Turn off the
power, release the scan head locking
switch, and turn the power back on.
13
The machine will not function. Turn the
power switch off, remove the power cord
from the outlet, and
contact our
Technical Assistance Department at 1-
(630)378-3590 in the USA or 905-568-
7140 in Canada.
-
Note
Note
TROUBLESHOOTING AND
MAINTENANCE