Sharp AL-1651CS All in One Printer User Manual


 
85
8
TD CARTRIDGE REPLACEMENT
When toner is low, the error indicator will light up and "TONER IS LOW" will appear
in the display. For information on purchasing a new TD cartridge, see "ABOUT
SUPPLIES AND OPTIONS" (p.91). If copying is continued while the indicator is lit,
copies will gradually become lighter until the toner runs out. When the toner runs
out, the machine will stop operating, the error indicator will blink, and "REPLACE
THE TONER CARTRIDGE" will appear in the display. Follow the procedure below to
replace the TD cartridge.
1
Open the bypass tray, side cover, and front cover, in that order.
To open the bypass tray, see "Loading paper in the bypass tray" (p.22). To
open the side cover and front cover, see "INSTALLING THE TD
CARTRIDGE" (p.14).
2
Gently pull the TD cartridge out
while pressing the lock release
button.
3
Install a new TD cartridge. To install the new cartridge, see
"INSTALLING THE TD CARTRIDGE" (p.14).
4
Close the front cover and then the side cover by pressing the
round projections near the side cover open button. The error
indicator will go out and the ready indicator will light up.
After the machine stops, it may be possible to make a few more
copies by taking the TD cartridge out of the machine, shaking it
horizontally, then reinstalling it. If copying is not possible after this
operation, replace the TD cartridge.
During a long copy run of a dark original, "TONER
REPLENISHMENT IN PROGRESS" appears in the display, and the
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the ready indicator will light up. Press
the [START] key ( ) to resume copying.
In order to help preserve the global environment, we recycle used TD
cartridges. Please read "COPIER TONER CARTRIDGE RECYCLING
PROGRAM", which is enclosed in the new toner cartridge package.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
Note
Lock release button
Note
Caution