Sharp AL-1651CS All in One Printer User Manual


 
5
ENVIRONMENTAL INFORMATION
For users in the USA
For users in Canada
As an
E
NERGY
S
TAR
®
Partner, SHARP has determined that
this product meets the
E
NERGY
S
TAR
®
guidelines for energy
efficiency.
Safety precautions:
This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and
1040.11 of the CDRH standards. This means that the unit does not produce
hazardous laser radiation. For your safety, observe the precautions below.
Do not remove the cabinet, operation panel or any other covers.
The unit’s exterior covers contain several safety interlock switches. Do not
bypass any safety interlock by inserting wedges or other items into switch slots.
A small amount of ozone is produced within the unit during operation. The
emission level is insufficient to cause any health hazard.
Note:
The present recommended long term exposure limit for ozone is 0.1ppm
(0.2mg/m
3
) calculated as an 8hr. time-weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it
is advisable to place the unit in a ventilated area.
The Environmental Choice Program guidelines are applied to
the products only in Canada. The products that meet the
Environmental Choice Program guidelines carry the logo
shown to the left. The products without the logo may not meet
the Environmental Choice Program guidelines.
USB 2.0 compatible
When connecting the machine by USB 2.0 (Hi-Speed mode),
be sure to read "System requirements for USB 2.0 (Hi-Speed
mode)" (p.38) to verify that your system and the machine
settings are configured appropriately.