Sharp UP-810F Cash Register User Manual


 
182
The following illustration shows those options included in the report programming group.
11 REPORT 1 0 SKIP
See “Zero skip” on page 182.
2 GENERAL RPT FORMAT
See “General report format” on page 183.
3 TRANS. RPT FORMAT
See “Transaction report format” on page 184.
4 CLERK RPT FORMAT
See “Clerk report format” on page 186.
5 HOURLY REPORT
See “Hourly report” on page 187.
6 STACKED REPORT
See “Stacked report” on page 188.
Report Programming
Use the following procedure to select any option included in the report group:
1.
From the SETTING menu, select “11 REPORT.”
• The REPORT menu will appear.
2.
Select any option from the following options list:
1 0 SKIP: Zero skip
2 GENERAL RPT FORMAT: General report format
3 TRANS. RPT FORMAT: Transaction report format
4 CLERK RPT FORMAT:Clerk report format
5 HOURLY REPORT: Hourly report
6 STACKED REPORT: Stacked report
Procedure
• TRANSACTION (Use the selective entry)
SKIP: Skips those data that are “0” in the transaction report.
NOT SKIP: Does not skip those data that are “0” in the transaction report.
• DEPARTMENT (Use the selective entry)
SKIP: Skips those data that are “0” in the department report.
NOT SKIP: Does not skip those data that are “0” in the department report.
• PLU (Use the selective entry)
SKIP: Skips those data that are “0” in the PLU/EAN report.
NOT SKIP: Does not skip those data that are “0” in the PLU/EAN report.
Program each item as follows:
• CLERK (Use the selective entry)
SKIP: Skips those data that are “0” in the clerk report.
NOT SKIP: Does not skip those data that are “0” in the clerk
report.
• CASHIER (Use the selective entry)
SKIP: Skips those data that are “0” in the cashier report.
NOT SKIP: Does not skip those data that are “0” in the
cashier report.
Zero skip
You can program whether or not to skip “0” in each report.
Procedure