Sharp UP-810F Cash Register User Manual


 
204
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 7)
When you program as “0”, no RS-232 channel is assigned.
• BAUD RATE (Use the selective entry)
Transmission speed (baud rate)
19200 bps/9600 bps/4800 bps
• DATA BITS (Use the selective entry)
Data bit: 7 bits/8 bits
• PARITY (Use the selective entry)
Parity bit: NON/ODD/EVEN
• STOP BIT (Use the selective entry)
Stop bit: 1 bit/2 bits
BCR (SCANNER)
Procedure
Program each item as follows:
• WAITING TIME (Use the numeric entry)
Waiting time until the message is displayed on the pole display
(1 to 999)
When you program as “0”, no message is displayed.
Pole display
Procedure
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as “0”, no RS-232 channel is assigned.
Scale/On-line
Procedure