Sharp UP-810F Cash Register User Manual


 
30
WMF clerk key system (option)
If you need this system, please consult your authorized SHARP dealer.
* The WMF clerk key is not a SHARP product.
• Contactless clerk key system has the priority over the clerk code entry system, that is, while a
clerk is signed on by the clerk code entry system, the other clerk can sign on by the contactless
clerk key system (the former clerk is signed off).
• While a clerk is signed on by the contactless clerk key system, the other clerk can not sign on
by the clerk code entry system.
• In the clerk code entry system, if another clerk is signed on while a clerk is signed on, the latter
will automatically be signed off.
• If you want to enter a clerk code before every transaction, consult your authorized SHARP
dealer.
• Your POS terminal can provide the clerk + cashier system instead of current system (clerk only
system). If you want to change the system, please consult your authorized SHARP dealer.
Cashier assignment (Clerk + cashier system)
To sign on:
To sign off:
Error Warning
In the following examples, your POS terminal will go into an error state accompanied by a warning beep and
the error message on the display. Clear the error state by pressing the
L
key and take a proper action.
• When you exceed a 32-digit number (entry limit overflow):
Cancel the entry and reenter a correct number.
• When you make an error in key operation:
Clear the error and try the entry again.
• When you make an entry beyond a programmed amount entry limit:
Check to see if the entered amount is correct. If it is correct, it can be rung up in the MGR mode.
Contact your manager.
• When an including-tax subtotal exceeds eight digits:
Delete the subtotal by pressing the
L
key and press a media key to finalize the transaction.
CASH
#
Cashier code Secret code
(In case of secret code is 0000)
through
CASH
1
CASH
10
CASH
#
e
NOTE
NOTE