Filter
Top Products
— 190 —
Machine number
When your store has two or more POS terminals, it is practical to assign unique machine numbers to them for
identification.
Procedure
Program the item as follows:
• MACHINE# (Use the numeric entry method)
Machine number (max. 6 digits: 0 to 999999)
Consecutive number
The consecutive number is increased by one each time a receipt is issued.
Procedure
Program the item as follows :
• CONSECUTIVE# (Use the numeric entry method)
Enter a number (max. 4 digits: 0 to 9999) that is one less
than the desired starting number.
Interval timer
You can program the timer for THE TILL TIMER, the screen save mode timer and the drawer alarm timer.
Procedure
Program each item as follows :
• TILL TIMER (Use the numeric entry method)
The POS terminal counts the number of times the drawer is left open
for longer than a programmed time limit. The counter will be
incremented by one each time a programmed time limit is reached.
The time limit for TILL TIMER can be preset to 0-255 seconds. The
count is printed on the transaction report and server report. If the
number “0” is entered, this function is unavailable.
• SCREEN SAVE (Use the numeric entry method)
Screen save mode timer (max. 2 digits : 0 to 99 minutes)
If the number “0” is entered, the POS terminal will turn off the display
after the POS terminal remains idle.
• DRAWER ALARM (Use the numeric entry method)
Length of alarm time with drawer opening (0 to 255 seconds)
• Your POS terminal monitors how long the drawer is kept open from
the moment the drawer is opened at the end of a transaction in the
REG/VOID mode. It stops time counting when a valid key (except the
[TAX], [BILL], and [RCPT] keys) is pressed for the next transaction. It
restarts time counting after that transaction is ended. You can stop
the buzzer alarm by closing the drawer. No key entries can be made
while the buzzer is sounding. If the number “0” is entered, this
function will be unavailable.