Filter
Top Products
Imaging Film
10
2 Press the release and open the print
compartment cover.
3 Remove the used roll from the
compartment, lifting the left ends of
the spools first.
Press green release
1 Open the operation panel.
Make sure the gears fit into the
slots in the ends of the rolls.
1 Slot
2 Slots
4 Remove the two green gears from
the spools.
DO NOT DISCARD THE TWO
GREEN GEARS!
5 Remove the new roll of imaging film
from its packaging.
• Cut the band that holds the rolls
together.
6 Insert the green gears.
all.book Page 10 Monday, December 3, 2007 2:10 PM