Filter
Top Products
Making Phone Calls
25
2. Sending
Faxes
Making Phone Calls
Dialing using the keypad
1 Lift the machine’s handset.
2 Press the number keys to dial the
phone number.
Dialling using a Rapid Key
1 Lift the machine’s handset.
2 Press the Rapid Key to which the
number is assigned.
• You can also press the Rapid Key
first (the speaker will turn on and
dialing will begin), and then pick up
the handset.
Dialling using the phonebook
1 Press , and then or
until the name or number of
the other party appears in the
display (names will appear in
alphabetical order).
F
F
F
F
Redialling
1 Press .
Display: [<REDIAL>]
2 Press or until the
desired number appears in the
display.
3 Lift the machine’s handset.
• Make sure the desired number
appears before lifting the handset, or
redialling will not take place
(sometimes it takes several seconds
for the number to appear).
F
F
F
F
Communication time display
While a fax is being sent or received,
and while you are using the handset
for a phone call, the amount of time the
line has been in use will appear in the
display. This can be used as a general
guideline to the length of the call.
2 Press (YES) to have the
machine check for a dial tone.
Press (NO) to have the
machine not check for a dial tone.
3 Press to exit.
To go directly to names that begin
with a particular letter, press the
appropriate number key one or
more times to enter that letter (see
page 7).
2 Lift the machine’s handset.
all.book Page 25 Monday, December 3, 2007 2:10 PM