Filter
Top Products
125
4.
Feed the end of the paper along with the paper positioning
guides as per the diagram.
5.
While holding down the paper, slowly close the print roller
arm.
NOTE
If the print roller arm is not securely locked, printing
is not done right. If this problem occurs, open the
arm, and close the arm as instructed above.
6.
Cut off the excess paper and replace the printer cover.
7.
Press the
r
key to make sure the paper end comes
out of the printer cover and clean paper appears.
NOTE
If the paper end does not come out, open the
printer cover, and pass the paper end between
the paper cutter and the paper guide of the printer
cover, and replace the printer cover.
Paper positioning guides