Sharp XE-A217W Cash Register User Manual


 
129
Installing the Fixing Angle Bracket
(XE-A207W/XE-A207B/XE-A217W/XE-A217B only)
Topreventtheregisterfrommovingwhenthedraweropens,thexinganglebracketissuppliedwiththe
register. By attaching the bracket to the table where the register is installed, you can hock the register on
this bracket and secure the register to its position.
Howtoinstallthexinganglebracket
1.
Thoroughlycleanthelocationwherethexingangle
bracket (B) is to be placed.
2.
Peelofftheadhesivetapeonthexinganglebracket.
3.
Hook the angle bracket onto the hook (A) that is located at
the bottom rear of the register.
4.
Firmlystickthexinganglebrackettothetablesurface
that your cleaned above.
Howtoremovetheregisterfromthexinganglebracket
1.
Lift up the front of the register and pull the register towards
you.