Sharp XE-A217W Cash Register User Manual


 
127
Cleaning the Printer (Printer Head/Sensor/Roller)
When the printed text is getting dark or faint, paper dust may be stuck to the printer head, sensor and/or
roller. Clean them as follows:
Caution: Never touch the printer head with a tool or anything hard as it may damage the head.
The paper cutter is mounted on the printer cover. Be careful not to cut yourself.
1.
Select the OFF mode.
2.
Remove the printer cover.
3.
Lift up the print roller arm.
4.
Remove the paper roll referring to the “Removing the
paper roll” section.
5.
Clean the printer head with a cotton swab or soft rag
moistened with ethyl alcohol or isopropyl alcohol.
Clean the roller and the sensor in the same manner.
6.
Reset the paper roll correctly by following the steps in
“Installing the paper roll.”
Removing the Till and the Drawer
<XE-A177>
The drawer in the register is detachable. After closing your business for the day, remove the drawer. To
detach the drawer, pull the lever fully out, and while holding the lever out, lift the drawer slightly and remove.
The coin case is detachable.
Coin case
Drawer
Lever
Printer head
Print roller arm
Sensor
Roller