Filter
Top Products
Connecting to Compo-
nent Video Equipment
Using a 3 RCA to 15-pin
D-sub Cable and the
DVI to 15-pin D-sub
Adaptor (INPUT 2)
Use a 3 RCA to 15-pin D-sub cable and the
DVI to 15-pin D-sub adaptor when connecting
component video equipment such as DVD
players and DTV decoders to INPUT 2 termi-
nal.
1 Connect a DVI to 15-pin D-sub
adaptor to the projector.
2 Connect a 3 RCA to 15-pin D-
sub cable to the above adaptor.
•Secure the connectors by tightening the
thumbscrews.
3 Connect the above cable to the
video equipment.
Note
•When connecting this projector to com-
ponent output terminal of the DTV de-
coder, select “Component” for “Signal
Type” on the OSD menu or press
on
the remote control. (See page 52.)
•Make sure to turn both the projector and
the video equipment off before connect-
ing.
3 RCA to 15-pin
D-sub cable
Type: AN-C3CP
(3.0 m)
DVI to 15-pin
D-sub adaptor
Type: AN-A1DV
(20 cm)
Optional
accessories
To analog component
output terminal
To INPUT 2 terminal
DVD player or
DTV decoder
DVI to 15-pin
D-sub adaptor
(sold separately)
3 RCA to 15-pin
D-sub cable
(sold separately)
Connecting the Projector to Other Devices
-18
XV_Z200E_E_p13_24.p65 03.10.30, 13:13PM18