Sharp XV-Z200E Projector User Manual


 
-48
Adjusting the Computer and DVD/DTV Images
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in
portions of the screen.
When Auto Sync is OFF
When Auto Sync is OFF, interference such
as flickering or vertical stripes may occur if
displaying tilings or vertical stripes. Should
this occur, adjust Clock, Phase, H-Pos
and V-Pos for obtaining an optimum image.
Select Clock, Phase, H-Pos or V-
Pos in the Fine Sync menu on the
menu screen.
For operating the menu screen, see
pages 38 to 41.
Note
Clock, Phase, H-Pos and V-Pos can-
not be used in the DIGITAL INPUT mode.
Clock and Phase cannot be used in the
Component mode.
Computer image adjustments can be
made easily by pressing
AUTO SYNC
on the re-
mote control. See page 50 for details.
To reset all adjustment items, select Re-
set on the Fine Sync menu screen and
press
.
The adjustable area of each item may be
changed according to the input signal.
On-screen Display
-48
Selected Item Description
Clock
Phase
H-Pos
V-Pos
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centres the on-screen image by moving it to the left or right.
Centres the on-screen image by moving it up or down.
XV_Z200E_E_p44_50.p65 03.10.30, 13:14PM48