Filter
Top Products
Connections and Setup
-23
Controlling the
Projector Using an
RS-232C Cable
When the RS-232C terminal on the projector
is connected to a computer with an RS-232C
cable (null modem, cross type, commercially
available), the computer can be used to con-
trol the projector and check the status of the
projector. See page 65 for details.
1 Connect an RS-232C cable to
the projector.
2 Connect the above cable to the
computer.
Note
•Do not connect or disconnect an RS-232C
cable to or from the computer while it is
on. This may damage your computer.
•The RS-232C function may not operate if
your computer terminal is not correctly set
up. Refer to the operation manual of the
computer for details.
•Refer to “Computer Compatibility Chart”
on page 66 for a list of computer signals
compatible with the projector. Use with
computer signals other than those listed
may cause some of the functions not to
work.
Controlling the Projector by a Computer
Desktop computer
To RS-232C terminal
To RS-232C terminal
RS-232C cable
(commercially available)
XV_Z200E_E_p13_24.p65 03.10.30, 13:13PM23