Filter
Top Products
-45
Adjustments and Settings
Adjusting the Colour
Temperature
This function allows for selecting the desired
colour temperature. With the lower value se-
lected, the projected image becomes warmer,
reddish and incandescent-like while with the
higher value, the image becomes cooler, blu-
ish and fluorescent-like.
Select “CLR Temp” in the “Picture”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
On-screen Display
5500K
6500K
7500K
8500K
9300K
10500K
Selected Item
Description
The less the value is set to, the
warmer, reddish, incandescent-like
the image becomes.
The more the value is set to, the
cooler, bluish, fluorescent-like the
image becomes.
“CLR Temp” is fine adjusted by following the
procedure below.
1 Select “CLR Temp” in the “Pic-
ture” menu on the menu
screen and press
.
•A single menu bar of “CLR Temp” is
displayed.
2 Press
''
''
' or
""
""
" to fine adjust the
colour temperature.
•With the lower value selected, the pro-
jected image becomes magenta-
tinged. With the higher value selected,
the projected image becomes green-
tinged.
•Pressing \ or | changes the value
of the colour temperature in the sub
menu.
Note
•Values on “CLR Temp” are only for gen-
eral standard purposes.
XV_Z200E_E_p44_50.p65 03.10.30, 13:14PM45