Filter
Top Products
-22
Connecting to a com-
puter with DIGITAL
RGB output Terminal
(DIGITAL INPUT)
1 Slide the “DIGITAL INPUT
TYPE” switch on the back ter-
minal board to “PC”.
2 Connect a DVI cable to the pro-
jector.
3 Connect the above cable to the
computer.
•Secure the connectors by tightening the
thumbscrews.
Note
•Select DIGITAL INPUT mode when con-
necting to digital output terminal of the
computer. (See page 31.)
•Before switching the “DIGITAL INPUT
TYPE” switch and connecting, be sure to
unplug the power cord of the projector
from the AC outlet and turn off the com-
puter to be connected. After making all
connections, turn on the projector and
then the computer.
•Be sure that the computer is the last de-
vice to be turned on after all the connec-
tions are made.
“Plug and Play” function
■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer will communicate their setting requirements, allowing for quick and easy setup.
■ Before using the “Plug and Play” function, be sure to turn on the projector first and the con-
nected computer last.
Note
•The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
Optional
accessory
DVI cable
Type:
AN-C3DV
(3.0 m)
Connecting the Projector to Other Devices
To DIGITAL INPUT
terminal
To DVI digital output terminal
DVI cable
(sold separately)
Desktop computer
DIGITAL INPUT
TYPE switch
XV_Z200E_E_p13_24.p65 03.10.30, 13:13PM22