Basic Operation
-33
Horizontal Keystone Correction
Vertical Keystone Correction
Keystone Correction
This function can be used to adjust the Key-
stone settings.
Note
•For details about using the menu screen,
see pages 38 to 41.
1 Press on the projector or
on the remote control.
2 Press / to select “H Key-
stone” or “V Keystone”.
3 Press / to move the mark
on the selected adjustment
item to the desired setting.
Note
•Straight lines and the edges of the
displayed image may appear
jagged, when adjusting the Key-
stone setting.
•When adjusting “H Keystone” and
“V Keystone” at the same time, the
values of adjustable angles for each
setting become smaller.
•The adjustable value of the “V Key-
stone” becomes extremely small
when “H Keystone” is made to be
the maximum value.
•Keystone correction is disabled
while the picture mode is set to
“SMART STRETCH”. (See page
35.)
4 To return to the normal screen,
press
again.
KEYSTONE button
", ',\, |
buttons
KEYSTONE button
", ',\, |
buttons
Selected Item
Description
H Keystone
Horizontally adjusts the keystone settings.
V Keystone
Vertically adjusts the keystone settings.
Reset
V and H Keystone adjustments are
returned to the factory preset settings.
XV_Z200E_E_p29_43.p65 03.10.30, 13:14PM33