Filter
Top Products
Chapter 4 MonComm Software
4-6
4.7 Edit System Parameters
System Parameters are accessed by clicking on the Config menu item followed by the
System sub menu. All of the system parameters, except Baud Rate, are available for
edit.
The system parameters are downloaded to the SQM-160 by clicking on the Update
Parameters button. The parameters can be reloaded into the form from the SQM-160 by
clicking the Refresh menu item.
Return to the main display by clicking on the Exit menu item.
4.8 Load Defaults
The default film and system parameters can be loaded by clicking on the Config menu
item followed by the Load Defaults sub menu item. The SQM-160 loads all default
values into its parameters upon receipt of this command.