Filter
Top Products
Chapter 1 Quick Start
1-2
1.2 Front Panel
Front Panel Controls
Display 1 Displays rate and thickness in normal operation.
Displays setup parameter name in program mode.
Display 2 Displays deposition time in normal operation.
Displays setup parameter value in program mode.
Control
Section
Zero thickness reading. Toggle Display 1 between Crystal Life
and Rate/Thickness readings. Toggle shutter relay on/off.
Configuration
Section
Program enters setup mode. Next/Prev moves thru menus.
Clear cancels change and returns value to its original setting.
Setpoint LEDs Illuminate when the indicated setpoint is reached.
Crystal Status
LEDs
Illuminate when a crystal is active and operating.
Flashes when an active crystal fails.
Control Knob Used to adjust values or scroll though menu selections.
Pushing the control knob stores the current setting.
Control Configuration
Crystal Status
Rate A/s Thickness kA
Time
Sigma
instruments
Σ
SQM-160
Rate/Thickness Monitor
Zero
Next Prev Clear Program
Xtal Life
Clear
Shutter
Open
Closed
Time SP
Thk SP
Final Thk
1
3
5
2
4
6
Display1 Display2 Crystal Status LEDs
Control Knob
Configuration SectionSetpoint LEDs
Control Section