Filter
Top Products
[ Installation ]
21
Pickup Truck Antenna Cable Routing Procedure
Figure 12 shows how the antenna cable should be routed from the antenna to the
dock in a pickup truck. The exact routing of the antenna cable may vary depending
upon where you have installed the dock in your vehicle. Avoid side airbag locations on
back pillars and above the doors. (Airbag locations are marked with “SRS” logos.)
1. Route Cable
Under Rubber
Molding Around
Windshield
2. Continue Tucking Cable
Under Molding To
Bottom of Windshield
3. Route Cable Out of Molding
and Into Weatherstripping
Around Door Opening.
Continue to Bottom of
Door Opening.
4. Bring Cable out from
Weatherstripping and
Route Under Carpet.
5. Bring Cable Out To
Docking Station
Location and Connect
to the Docking Station
Figure 12Figure 12