Filter
Top Products
99-00964-20 A0 Connecting Your Interactive Whiteboard System 21
Connecting Peripheral Visual or Audio-Visual Devices
To connect a DVD/Blu-ray player, VCR, document camera, digital camera or other visual or audio-visual
peripheral device to the SMART Board interactive whiteboard system, you must connect the device’s video
and audio outputs to the ECP. You can have up to three peripheral devices and a host computer connected at
one time.
1. Turn off your interactive whiteboard system.
2. Connect the device’s video cables to the ECP
using the appropriate inputs. Input 2 is the
VGA connector, input 3 is the S-video 4-pin
mini-DIN connector and input 4 is the
composite video input.
3. For each peripheral device, connect the
device’s audio cables to the associated red
and white RCA jacks next to the appropriate
video input.
To connect S-video, composite and other audio-visual inputs for peripheral devices
IMPORTANT
If you have peripheral devices that do not use a 4-pin mini-DIN connector or an RCA composite
video jack, or if your device has an audio connection that does not use RCA jacks, you may
need to purchase third-party adapters.