Smart Technologies 99-00964-20 Whiteboard Accessories User Manual


 
WARNING
To prevent premature lamp failure or exposure to mercury, always handle the fragile lamp
assembly with care. Use gloves when touching the lamp. Do not touch the lamp with
your fingers.
Failure to follow the installation instructions shipped with
your SMART product could result in
personal injury and damage to the product.
Two people are required to remove and mount the projector and the interactive whiteboard
on a wa
ll because they might be too heavy for one person to maneuver onto their
wall-mounting brackets.
When mounting the projector on a framed wall, you must attach both the mounting bracket
and safety tether
to a stud to safely support the projector’s weight. If you use only drywall
anchors, the drywall can fail, resulting in product damage and possible personal injury.
Do not remove any screws other than those specified in the lamp r
eplacement instructions.
If you remove the bolt supporting the limit strap, the p
rojector’s arm will be free to swing.
Make sure that the bolt is tightened, and never remove it from the unit without supporting the
projector’s arm first.
To reduce the risk of fire or electric shock, do not expose any component of your
SMART
Board interactive whiteboard system to rain or moisture.
Do not climb (or allow children to climb) on any part of
yo
ur wall-mounted SMART Board interactive
whiteboard system.
Climbing on the interactive whiteboard or projector arm
could result in personal injury or product damage.
Do not stare (or allow children to stare) directly into the
beam of light cr
eated by the projector. Instruct children
not to look in the direction of, or stare at, this beam of
light. Encourage users to keep their back to the projector
when working at the interactive whiteboard. Before they
turn to face the audience, users should step sideways,
out of the projector’s beam.
Do not touch the head or lens of the projector because it
ca
n become extremely hot during normal operation.
Cleaning a boom-mounted projector may result in a fall or injury.
Don’t add extra weight or apply pressure to t
he UF55 projector boom, the wall-mounted
interactive whiteboard or its pen tray. SMART Technologies designed the brackets to support
only the weight of the components during normal use.
99-00964-20 A0 Important Information iii