Filter
Top Products
99-00964-20 A0 Appendix A: Remotely Managing Your Interactive Whiteboard System 43
Audio Control
Allows you to switch between audio output controls. This value range should match the range displayed on the
on-screen display.
Command Response Powered Off
set volume [target] volume=[current] no
get volume volume=[current] no
Field Possible Values Description
target volume +val
-val
=-20 to 20
If you specify a + or - before the value,
it adds or subtract
s it from the current
value. If you indicate a specific
numerical value, it sets the volume
directly to the number.
current volume
-20 to 20
Indicates the current volume selected
Network Information
Allows you to switch network information.
Command Response Powered off
get netstatus netstatus=[current] yes
set dhcp dhcp=[current] yes
get dhcp dhcp=[current] yes
set ipaddr ipaddr=[current] yes
get ipaddr ipaddr=[current] yes
set subnetmask subnetmask=[current] yes
get subnetmask subnetmask=[current] yes
set gateway gateway=[current] yes
get gateway gateway=[current] yes
set primarydns primarydns=[current] yes
get primarydns primarydns=[current] yes
get macaddr macaddr=[current] yes
(Continued on next page)