Filter
Top Products
24 Using Your Interactive Whiteboard System 99-00964-20 A0
After Completing the Installation
When you connect your interactive whiteboard system to a computer with SMART Board or SMART Notebook
software installed, the computer interprets your touch on the interactive screen as left mouse clicks and moves
the mouse pointer to the corresponding point on the screen. You can also write over your desktop or any open
application with digital ink, and then capture and save these notes to a Notebook file for future reference
and distribution. The full capabilities of SMART Notebook sof
tware include SMART Board tools and a wide range
of digital content.
For more information on SMART Board or SMART Notebook software, access the software’s online
Help s
ystem.
Using Your UF55 Projector
The UF55 projector includes two LED indicators. You can view the Power and Temperature status indicators on
the projector’s underside to determine the projector status and to troubleshoot unexpected behavior.
Using Your Remote Control
The UF55 projector remote control enables you to op
en on-screen projector menus and change
the projector settings. You can also use the remote control’s ON
/IDLE button or the ECP Power button to
turn the projector on or off.
You can access the projector’s settings thr
ough the remote control’s Menu button.
To adjust settings using the remote control
1. Press the lef
t or right button to access a menu option.
2. Press the up or down button to select the relevant menu option.
3. Press the left or right button to move between menu option settings.
4. Press enter when you are satisfied with the settings.
NOTE: Ensure that the plastic casing on the remote control battery is removed before using the remote control.