Filter
Top Products
Page 21 of 80
intelligent wireless platform
airHaul™ Nexus User Guide
2.5.1 Root Bridge to Remote Bridge
Follow the steps below to change from Root Bridge mode to Remote Bridge mode:
1. Go to Tools | System Configuration drop down menu. The System Configuration will be
displayed as shown below (Figure 2-8).
2. Alternatively, click on the current device mode link on the top right hand corner to go to the
System Configuration page. .
3. Under Current Operational Mode, Select Remote Bridge and click on Apply Changes. A
confirmation pop-up window will be displayed.
4. Enter IP Address, IP Mask and Gateway for Ethernet Configuration.
5. Click on the Apply Changes button to change the settings. The device will be rebooted and
set to the chosen operational mode.
Figure 2-8 Changing Root Bridge to Remote Bridge
2.5.2 Root Bridge to Remote Router
Follow the steps below to change Root Bridge mode to Remote Router mode
1. Go to Tools | System Configuration drop down menu. The System Configuration will be
displayed as shown below.
.
2. Alternatively, click on the Current Device Mode link on the top right hand corner to go to the
System Configuration page.
3. Choose Router under the Remote Device option. Click on Apply Changes. A confirmation
pop-up window will be displayed.
4. Enter IP Address, IP Mask and Gateway for Ethernet and Wireless Configurations.