SmartBridges sB3010 Network Router User Manual


 
Page 50 of 80
intelligent wireless platform
airHaul™ Nexus User Guide
Figure 3-1 Performance Settings
3.2. Bandwidth Controller
Using the bandwidth controller on the root device, the user can limit the wireless link bandwidth in the
egress direction. To effectively control the upload and download bandwidth, the user will need to
specify the necessary bandwidth parameters on both airHaul devices.
The user can key in the maximum bandwidth of the wireless link allowed if the feeding bandwidth is
adequate.
Follow the steps below to change the bandwidth parameters:
1. From the menu bar click on Networking | Bandwidth Controller drop down menu item.
2. Click on the Enable radio button.
3. Enter Maximum Wireless Throughput.
4. Click on the Apply Changes button to change the settings.
Figure 3-2 Bandwidth Controller