Filter
Top Products
15
■ Calling up Setting mode
Switch the appliance on. After the
power-on routine, the appliance starts
the last activated application program
automatically. To call
up Setting mode first
press ENTER and then the F key
simultaneously. You are now in
the Setting mode selection menu.
■ Inputs in Setting mode
In most cases you can select from several different
settings available. With editable values, you can type
in values into the numerical or alphanumeric keypad.
■ Settings in Setting mode
With the parameters in Setting mode, you can
adapt the weighing and taring application program
to your specific requirements.
■ Settings in "Program Settings"
menu
In the "Program Settings" Settings menu, you can
adapt the Application program of your scale to your
specific requirements – the bed scale mainly uses
"Weighing and taring".
■ Settings in "Terminal" menu
In "Terminal" Setting mode, you will find the follow-
ing request and setting options.
Version
AZG software version Display only
AZG applications software Display only
AZG serial number Display only
CPU board serial number Display only
Display
Backlight Sets the luminosity, enter
as a percentage into the
numer ical keypad; 0% = dark,
100% = fully luminosity;
factory setting: 80%
Contrast Contrast setting, enter as
a percentage into the nu-
merical keypad; 1% is low-
est contrast, 100% is full
contrast; factory setting 50%
Language Deutsch/English/François
Decimal separator Comma, point or none
Factory setting: comma
Second unit g/t/lb/mg/oz (additional
field in display)
Keypad
Keylock Individual, several or all
keys on the keypad can be
locked. Press the key to be
locked to change the status
of the key from "unlocked"
to "locked" and vice versa.
+