Filter
Top Products
ENGLISH
Bed scale 7711
20
• Confirm the message "General" by pressing ENTER.
• Press the TARE key to browse to "Fixed tare va-
lues" and accept by pressing ENTER.
Clearing a tare value
• The last selected fixed tare value memory is
displayed. Press the F or TARE key to browse
the required fixed tare value memory or enter
the memory location number and confirm by
pressing ENTER.
• Clear the displayed fixed tare value memory
by pressing the C key.
• The gap in the consecutive number scheme is
closed. The following fixed tare value memories
are given a number reduced by 1.
CAUTION: Under Setting mode > Program Set-
tings > General > Delete fixed tare values, all
fixed values are cleared from the memory!
■ Provisional tare/dialysis function
Setting and using the operating mode
• Setting in Setting mode
(Setting mode > Program Settings > Weig-
hing + Taring > F key > Dialysis function)
• Press ENTER and the F key simultaneously to
access Setting mode.
• The arrow points to "Program Settings". Press
ENTER to confirm.
• Press TARE to browse down to "Weighing + Ta-
ring" and press ENTER to confirm.
• Confirm the message "F key" by pressing ENTER.
• Press TARE (down) or the F key (up) to browse
to "Dialysis function" and press ENTER to confirm.
There is an acoustic acknowledgement.
• Exit Setting mode by pressing the ORG key. The
gross value is displayed.
Using the dialysis function
• Press the F key (with a load on the scale). Mes-
sage: "Place tare". Place the additional tare on
the scale. Confirm by pressing TARE. The addi-
tional tare is accepted into the tare memory and
the net value remains unchanged.
• Repeat this procedure for other additional tares.
The weight is displayed with the message "Net".
When the scale is clipped off, the tare weight is
displayed with a negative sign.
• Clear the tare by pressing the ZEROING key.
Displaying the value in the tare memory
To display the tare memory, press the INFO key and
then the TARE key. Press the ZEROING key to exit
the display.
Changing the tare value manually later
Display the tare value by pressing the INFO key and
then the TARE key. Enter the new value into the
KEYPAD. Press the ZEROING key to abort the input.
The existing value is retained or the new tare value
is saved by pressing the TARE key. Confirm by pres-
sing ENTER and return to the application program.