Filter
Top Products
19
Transferring fixed tare values from a PC to the
digital indicator
• Here you require a special software. For more
information, please contact the Soehnle Profes-
sional Service personnel.
Changing or overwriting a fixed tare value memory
• Call up the Input menu
(Setting mode > Program Settings > General
> Fixed tare values)
• Press ENTER and the F key simultaneously to
access Setting mode.
• The arrow points to "Program Settings". Confirm
by pressing ENTER.
• Confirm the message "General" by pressing ENTER.
• Press the TARE key to browse to "Fixed tare va-
lues" and accept by pressing ENTER.
Correcting values
• The last selected fixed tare value memory is dis-
played. Press the F or TARE key to select the tare
memory to be changed or enter the memory lo-
cation number and confirm by pressing ENTER.
• Press ENTER. The input field for the tare location
description is displayed.
• Change the description by typing it into the
KEYPAD and confirm by pressing ENTER.
• The arrow points to "Tare value".
• Press ENTER. The input field for the tare value
is displayed.
• Change the tare value by typing it into the KEY-
PAD and confirm by pressing ENTER.
• Go back to the tare memory selection by pressing
the ZEROING key.
• If you want to change other tare memories,
press the F key of the TARE key to select the
next memory location to be changed and repeat
the procedure as described above.
• To return to weighing mode, press the ZEROING
key and then the ORG key.
Calling up the list of fixed tare value memories
for taring
The tare value from the fixed tare value memory
can be activated with the scale unloaded (i.e. be-
fore the weighing operation) or with the scale loa-
ded (during a weighing operation).
• The display pane shows a weight value ≥ 0.000 kg.
• First press ENTER and then the TARE key simul-
taneously. The fixed tare value memory last used
appears in the display.
• Press the F or TARE key to browse to the required
fixed tare value memory or type in the memory
location number and confirm by pressing ENTER.
• Press ENTER to activate the fixed tare value.
The display shows the gross value minus the
tare value (net).
• Further tare values from the memory are activated
by repeating the procedure described above.
Clearing an existing fixed value
• Call up the input menu
(Setting mode > Program Settings > General
> Fixed tare values)
• Press ENTER and the F key simultaneously to
access Setting mode.
• The arrow points to "Program Settings". Press
ENTER to confirm.