Filter
Top Products
25
51 Value above zero range limit
> Zeroing not possible because measured value
is outside the set zero range limit
52 Overload
> Measured value above weighing range
53 Underload
> Measured value below 0 (zero)
55 Place weight on scale
> Scale empty or no clip off setting made
according to set clip off factor
75 Replace backup battery
76 Charge batteries
80 Abort external command
81 Timeout external command
82 Number exists already
> The identification assigned to a fixed value
exists already
90 Fixed value memory occupied / full
> A total of 100 memory locations are available
valid for all programs
98 Wrong barcode