Filter
Top Products
SonicWALL CDP 6080 / 6080B Getting Started Guide Page 15
Configuring Appliance Settings
After registering your SonicWALL CDP on MySonicWALL and
connecting a management computer to it, you are ready to
configure the appliance for use on your network.
Changing the Administrator Password
1. On the System > Settings page, click the Password tab.
2. Type the desired password into the Password field, and
again into the Verify Password field, then click Apply.
You are logged out of the SonicWALL CDP appliance.
3. In the Logged Out screen, click the Login Again button
and then log in as “admin” using your new password.
Configuring Local Time Zone Settings
1. On the System > Settings page, click the Time tab.
2. Complete the fields as described in the table below, then
click Apply.
Field Description
Time (hh:mm:ss) Select the time in 24-hour format by
clicking the up or down arrows next to
each field (hours, minutes, seconds).
Date Select the date (month, day, year)
from the pop-up calendar.
Time Zone Select your local time zone from the
drop-down list.
Set Time
Automatically
using NTP
Select this checkbox to allow the time
to be set automatically using NTP.
Configure NTP servers on the NTP
tab.