Sony 1080i Microcassette Recorder User Manual


 
Appendix 65
Appendix
Appendix
Using the optional battery
Charging the optional battery
Attach the optional “InfoLITHIUM” Battery (L series)
to the unit and charge the battery.
“InfoLITHIUM” L series battery packs have the
mark.
“InfoLITHIUM” is a trademark of Sony Corporation.
1 Attach the battery with the power turned off.
2 Connect the power cord and AC adaptor using the
procedure in “Preparing the Power Supply”.
The CHG (charge) lamp will light and charging
starts.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacture.
Note
The battery cannot be charged while the power is ON.
When charging is completed
The CHG (charge) lamp turns off (full charge).
Unplug the AC adaptor from the DC IN jack.
To remove the battery pack
Slide the battery pack out while pressing the BATT
RELEASE button.
Checking the remaining battery power
– BATERRY INFO
You can check the battery charge level and the time
available for playback with this charge level by
pressing the DISPLAY/BATT INFO button during
charging or while the unit is turned off.
The battery information is displayed for approximately
7 seconds. If you press and hold the DISPLAY/BATT
INFO button, the battery information is displayed for
approximately 20 seconds.
1 BATTERY CHARGE LEVEL: Approximate
remaining battery power
2 Remaining playback time when the LCD ON/OFF
switch is turned on
3 Remaining playback time when the LCD ON/OFF
switch is turned off
BATT RELEASE
(battery release) button
BATTERY INFO
BATTERY CHARGE LEVEL
PLAY TIME AVAILABLE
LCD SCREEN ON
LCD SCREEN OFF
435 min
500 min
1
2
3